top of page
Arbor group on white-new.jpg


Cornwall Terrace

Cornwall Terrace

This project involved the total remodelling of No. 1 Cornwall Terrace, a Grade 1 listed residence next to Regents Park in London. 

The ironmongery requirements comprised the supply of door and window fittings, many of which had to be specially made to the designer`s requirements, along with cupboard and wardrobe fittings. 

We undertook the complete ironmongery scheduling for 120 doors, 60 windows and 170 cupboards. 

Cornwall Terrace - exterior night.jpg
Cornwall Terrace - reception 1.jpg

Reception Room.

Cornwall Terrace - reception 2.jpg

In the main reception rooms the doors required specially made hinges, with a non-standard finial, along with decorative mortice knobs and escutcheons.

99733 hinge.jpg

The ball bearing hinges (product code 99733) were specially made and featured finials to the designer`s specification.

99841 mortice knob V2.jpg

The 99841 mortice knob in a polished and lacquered finish.

99843 mort knob & 99845 escutcheon.jpg

The decorative brass mortice knob (99843) and escutcheon (99845) were supplied polished and lacquered.  

Cornwall Terrace - pool.jpg

On the lower ground floor, surrounding the pool, were situated exercise and treatment rooms which incorporated sliding doors. The fittings supplied for these were flush ring handles operating a privacy lock with a recessed emergency release. A specially made handle to match the flush ring handle was also fitted.

flush ring handle-34029.jpg

The 34029 65mm flush handle operated a mortice sliding bathroom lock (22061).


The 34512 emergency release was fitted to facilitate emergency unlocking of the bathroom lock.

99805-65 flush handle V2.jpg

To help with sliding the door a special flush handle (99805-65) was supplied.

Cornwall Terrace - bedroom.jpg

Leading off the master bedroom there were dressing rooms, and for these doors we made special pull handles with wood to match the veneer on the doors. The brass parts were “distressed”.

99738 pull handles.jpg

The 99738 pull handles were fitted to the wardrobes in the two dressing rooms. The wood was chosen to match the veneers on the doors, and the handles featured concealed fixings. 

Cornwall Terrace - window.jpg

The windows required sash fasteners, lifts and sash stops. We also supplied brass shutter bars. 

63015L fitch fastener - resized.jpg

The 63015 sash fasteners were supplied in both a polished brass and satin nickel finish.


The 64001 sash lift gives the option of a longer version if the frame is too deep for the standard item. 


The 65007 Weekes sash stop offers a quick way of securing a sash window, and can be positioned to allow the sash to be partly opened for ventilation. 

65005-Shutter Bar.jpg

Our 65005 shutter bars are made from brass and are available in any length to suit the shutter. 

bottom of page